15,030 results match your criteria resin bonding


Transfer accuracy of four different lingual retainer transfer methods using digital orthodontic models: An in vivo comparative study.

Angle Orthod 2021 Jul 21. Epub 2021 Jul 21.

Objectives: To compare the transfer accuracy of four different lingual retainer (LR) transfer methods using three-dimensional digital models.

Materials And Methods: Four groups of 17 patients each were created: finger transfer (FT), silicone key transfer (SKT), acrylic resin transfer (ART), and indirect bonding (IDB). At the end of orthodontic treatment, the mandibular dental casts of patients were scanned with the LR wire. Read More

View Article and Full-Text PDF

Experimental Investigation on the Buckling Capacity of Angle Steel Strengthened at Both Legs Using VaRTM-Processed Unbonded CFRP Laminates.

Polymers (Basel) 2021 Jul 5;13(13). Epub 2021 Jul 5.

Department of Architecture and Civil Engineering, Toyohashi University of Technology, Toyohashi 441-8580, Aichi, Japan.

Strengthening steel structures by using carbon fiber reinforced polymer (CFRP) laminates showed a growth trend in the last several years. A similar strengthening technique, known as adhesive bonding, has also been adopted. This paper presented a promising alternative for strengthening steel members against buckling by using vacuum-assisted resin transfer molding (VaRTM)-processed unbonded CFRP laminates. Read More

View Article and Full-Text PDF

CLINICAL BEHAVIOR OF UNIVERSAL ADHESIVES IN NON-CARIOUS CERVICAL LESIONS: A RANDOMIZED CLINICAL TRIAL.

J Dent 2021 Jul 14:103747. Epub 2021 Jul 14.

Department of Restorative Dentistry, School of Dentistry, Federal University of Santa Maria, Av. Roraima, 1000, Cidade Universitária, building 26F, Camobi, Santa Maria - RS, Brazil, Post Code: 97105-900. Electronic address:

Objectives: This randomized, double-blind clinical trial, parallel design, evaluated the behavior of two universal adhesives used in etch-and-rinse (ER) or self-etch (SE) approach in non-carious cervical lesions (NCCLs).

Methods: Two hundred and eleven NCCLs were selected in 54 participants and randomly allocated into four experimental groups: Scotchbond Universal Adhesive - SBU (3M Oral Care) and Prime & Bond Elect - PB (Dentsply Sirona) used in ER and SE modes. Two trained operators placed all resin composite restorations (Filtek Z250, 3M Oral Care). Read More

View Article and Full-Text PDF

Bonding Performance of Self-etching Adhesives to Bur-cut Dentin with Active Application Mode.

J Adhes Dent 2021 Jul;23(4):357-365

Purpose: This study evaluated whether active application of self-etching adhesives would influence their microtensile bond strength (µTBS) to dentin cut with burs of different grit sizes.

Materials And Methods: Eighty-four human premolars were divided into 12 groups according to 1) two dentin surface preparations with either superfine- or regular-grit diamond burs; 2) three adhesives - Clearfil SE Bond 2 (SE2), Scotchbond Universal (SBU, 3M Oral Care) and G-Premio Bond (GPB, GC); and 3) two application modes of each adhesive (active or passive). Six bonded teeth per group were sectioned into sticks for µTBS testing. Read More

View Article and Full-Text PDF

Effect of EDTA Concentrations as Irrigation Solution on Bonding of Fiber Posts into Root Canals with Universal Adhesives.

J Adhes Dent 2021 Jul;23(4):347-356

Purpose: To evaluate the effect of different concentrations of ethylene-diamine-tetra acetic acid (EDTA) on bond strength (BS) and nanoleakage (NL) of fiber posts bonded into root canals.

Materials And Methods: Seventy-two single roots were endodontically treated and divided into six groups (n = 12), according to the combination of the following factors: surface treatment (no irrigation [control], 17% EDTA, or 24% EDTA), and composite cement applied with an adhesive used in a self-etch mode (Single Bond Universal/RelyX Ultimate [SB], 3M Oral Care; Ambar Universal/Allcem [AM], FGM). After fiber post cementation, six 1-mm-thick disks were obtained for each root. Read More

View Article and Full-Text PDF

Do Different Pretreatment Methods Influence the Microtensile Bond Strength of Composite Cements to Silicate Ceramic?

J Adhes Dent 2021 Jul;23(4):335-345

Purpose: The pretreatment of glass-ceramic before adhesive cementation can be performed with hydrofluoric acid (HF)/silanization (S) or with an ammonium polyfluoride-containing primer (APF). It can be modified by application of a silane-containing universal adhesive (UA) and/or additional silanization. The aim of this study was to evaluate the bond strength of composite cements to two different glass ceramics after different pretreatments and aging. Read More

View Article and Full-Text PDF

Effect of Surface Moisture on Bur-cut Dentin on Bonding of HEMA-free and HEMA-containing Universal Adhesives with or without Methacrylamide Monomer.

J Adhes Dent 2021 Jul;23(4):327-334

Purpose: The effect of surface moisture on bur-cut dentin on the microtensile bond strength (μTBS) of universal adhesives with various contents of 2-hydroxyethyl methacrylate (HEMA) and methacrylamide monomers was evaluated.

Materials And Methods: Flat mid-coronal dentin surfaces of human molars were exposed, and a standardized smear layer was prepared using a fine-grit diamond bur. The surfaces were either left wet or air dried for 10 s before bonding with Clearfil Universal Bond Quick (UBQ), experimental UBQ without an amide monomer (UBQexp), Scotchbond Universal (SBU), Prime&Bond Universal (PBU), or BeautiBond Universal (BBU). Read More

View Article and Full-Text PDF

Methods to Clean Residual Resin Cement from Lithium-Disilicate Glass-Ceramic.

J Adhes Dent 2021 Jul;23(4):319-326

Purpose: To compare the effect of different methods of cleaning residual composite cement from the surface of lithium-disilicate glass-ceramic on its bond strength.

Materials And Methods: Blocks of lithium-silicate glass-ceramic (e.max CAD) were coated with composite cement. Read More

View Article and Full-Text PDF

The Effect of Dentin Bonding and Material Thickness on the Flexural Properties of a Lithium-Disilicate Glass-Ceramic.

J Adhes Dent 2021 Jul;23(4):309-318

Purpose: Thanks to adhesive techniques and strengthened glass ceramics, ultrathin bonded occlusal veneers have been recently introduced. However, since a universally accepted thickness limit for ultrathin ceramics has yet to be established, their resistance to fracture needs to be better investigated. The purpose of this in vitro study was to evaluate the effect of dentin bonding on the flexural properties (ie, fracture load and flexural strength) of a lithium-disilicate (LD) glass ceramic when used in thicknesses equal to or less than the manufacturer's recommendations for occlusal restorations. Read More

View Article and Full-Text PDF

The Effect of Deproteinizing Agents on Bond Strength of Resin-based Materials to Enamel: A Systematic Review and Meta-Analysis of In Vitro Studies.

J Adhes Dent 2021 Jul;23(4):287-296

Purpose: To systematically review the literature to evaluate whether the bond strength of resin-based materials to enamel is affected by deproteinizing agents.

Materials And Methods: This systematic review and meta-analysis was conducted according to the PRISMA statement. PubMed, ISI Web of Science, Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BVS databases were screened up to December 2020. Read More

View Article and Full-Text PDF

Comparison between Mineral Trioxide Aggregate Mixed with Water and Water-based Gel Regarding Shear Bond Strength with Resin-modified Glass Ionomer Cement and Composite.

J Contemp Dent Pract 2021 Apr 1;22(4):353-356. Epub 2021 Apr 1.

Department of Dentistry, Anugrah Narayan Magadh Medical College and Hospital, Gaya, Bihar, India.

Aim And Objective: To compare between mineral trioxide aggregate (MTA) mixed with water and water-based gel regarding shear bond strength with resin-modified glass ionomer cement (RMGIC) and composite.

Methods And Materials: In this study, 40 blocks of cylindrical shape were prepared with acrylic. These blocks were divided into four groups with each group consisting of 10 blocks: group-1A: MTA + distilled water + composite, group-1B: MTA + distilled water + RMGIC, group-2A: MTA + polymer + composite, and group-2B: RMGIC + MTA + polymer. Read More

View Article and Full-Text PDF

Evaluation of the effects of three pretreatment conditioners and a surface preparation system on the bonding durability of composite resin adhesive to a gold alloy.

Dent Mater J 2021 Jul 13. Epub 2021 Jul 13.

Department of Fixed Prosthetic Dentistry, Kagoshima University Graduate School of Medical and Dental Sciences.

This study aimed to evaluate the effect of three pretreatment conditioners and surface preparations on a composite resin adhesive for a gold alloy. Cast disk specimens were made and bonded with RelyX Unicem luting agent under six surface conditions: 1) polished with No.600 carbide paper, 2) air-abraded with alumina, 3) Alloy Primer metal conditioner was applied after alumina-abrasion, 4) Monobond Plus multipurpose conditioner was applied after alumina-abrasion, 5) M. Read More

View Article and Full-Text PDF

Using Proanthocyanidin as a Root Dentin Conditioner for GIC Restorations.

J Dent Res 2021 Jul 14:220345211018182. Epub 2021 Jul 14.

Melbourne Dental School, The University of Melbourne, Carlton, VIC, Australia.

Glass ionomer cements (GICs) are considered the material of choice for restoration of root carious lesions (RCLs). When bonding to demineralized dentin, the collapse of dentinal collagen during restorative treatment may pose challenges. Considering its acidic nature and collagen biomodification effects, proanthocyanidin (PAC) could be potentially used as a dentin conditioner to remove the smear layer while simultaneously acting to biomodify the dentinal collagen involved in the bonding interface. Read More

View Article and Full-Text PDF

Silane Heat Treatment Could Eliminate the Hydrofluoric Acid Etching of Lithium Disilicate Overlays: A Four-Year Follow-Up.

Case Rep Dent 2021 22;2021:9961621. Epub 2021 Jun 22.

Department of Conservative Dentistry, Faculty of Dental Medicine, Medical University of Sofia, Georgi Sofiiski 3 Str., Sofia, Bulgaria.

A four-year follow-up of a novel silane heat treatment method for bonding lithium disilicate overlays to tooth structures without hydrofluoric acid etching of the ceramic surface is presented in this case report. Silane heat treatment modifies the silane layer and thus enhances resin ceramic bond strength without hydrofluoric acid etching. The standard ceramic preparation technique prior to bonding silicate ceramics to tooth structure is hydrofluoric acid etching and applying a silane coupling agent, followed by dental adhesive. Read More

View Article and Full-Text PDF

Bond Strength of Orthodontic Brackets to Temporary Crowns: In Vitro Effects of Surface Treatment.

Int J Dent 2021 29;2021:9999933. Epub 2021 Jun 29.

Department of Substitutive Dental Sciences, College of Dentistry, Imam Abdulrahman Bin Faisal University, P. O. Box 1982, Dammam 31441, Saudi Arabia.

Background: The number of patients seeking orthodontic treatment has been consistently increasing. During orthodontic treatment, it is recommended to place the provisional restoration and to delay the final restoration until completion of orthodontic treatment. Recurrent bracket debonding necessitates orthodontists to prepare the bonding area with special measures. Read More

View Article and Full-Text PDF

Fatigue Behavior of Monolithic Zirconia-Reinforced Lithium Silicate Ceramic Restorations: Effects of Conditionings of the Intaglio Surface and the Resin Cements.

Oper Dent 2021 Jul 11. Epub 2021 Jul 11.

Objective: This study assessed the effect of conditioning of the intaglio surface and resin cements on the fatigue behavior of zirconia-reinforced lithium silicate ceramic (ZLS) restorations cemented to a dentin analogue.

Methods: ZLS ceramic (Ø=10 mm, thickness=1.5 mm) and dentin analogue (Ø=10 mm, thickness=2. Read More

View Article and Full-Text PDF

Influence of the ceramic translucency on the relative degree of conversion of a direct composite and dual-curing resin cement through lithium disilicate onlays and endocrowns.

J Mech Behav Biomed Mater 2021 Jun 29;122:104662. Epub 2021 Jun 29.

The University of Groningen, University Medical Center Groningen, Center for Dentistry and Oral Hygiene, Department of Restorative Dentistry and Biomaterials, Groningen, the Netherlands; Martini Hospital, Department of Special Dental Care, Groningen, the Netherlands.

Introduction: The goal of this study was to investigate the influence of the ceramic translucency, restoration type and polymerization time on the relative degree of conversion of a dual-curing resin cement and a conventional microhybrid resin composite using a high-power light-curing device.

Methods And Materials: Two 4.0 mm thick onlay (O) and two 7. Read More

View Article and Full-Text PDF

Resin immobilized gold nanocomposites assisted surface enhanced infrared absorption (SEIRA) spectroscopy for improved surface assimilation of methylene blue from aqueous solution.

Spectrochim Acta A Mol Biomol Spectrosc 2021 Jul 2;262:120144. Epub 2021 Jul 2.

State Forensic Science Laboratory, Department of Home, Government of Chhattisgarh, Raipur 492001, Chhattisgarh, India.

In the present work, we report the adsorption of the methylene blue (MB) dye from an aqueous solution employing resin immobilized gold nanocomposites (R-AuNCs) assisted surface-enhanced infrared absorption (SEIRA) spectroscopy. The appropriate adsorption isotherm models, including the Langmuir, Freundlich, and Temkin are tested to reveal the interactive behavior between the adsorbent (R-AuNCs) and adsorbed (MB). Interestingly, Fourier transform infrared spectroscopy (FTIR) in combination with R-AuNC materials could be another approach through which the analysis of adsorption-desorption of MB on the surface of nanocomposite adsorbents is possible in a more precise way with high sensitivity and adsorptivity. Read More

View Article and Full-Text PDF

Energy Decomposition Analysis of the Adhesive Interaction between an Epoxy Resin Layer and a Silica Surface.

Langmuir 2021 Jul 9;37(28):8417-8425. Epub 2021 Jul 9.

Institute for Materials Chemistry and Engineering and IRCCS, Kyushu University, Nishi-ku, Fukuoka 819-0395, Japan.

We investigate the adhesive interaction energy (Δ) between an epoxy resin and a silica surface using pair interaction energy decomposition analysis (PIEDA), which decomposes Δ into four components: electrostatic (Δ), exchange repulsion (Δ), charge-transfer (Δ), and dispersion (Δ) energies based on quantum chemistry. Our previous study with PIEDA showed that synergistic effects of Δ and Δ are critical at the interface between an epoxy resin fragment and a hydrophilic surface. The present study is designed to show in detail that the synergistic effects are significant at the interface between an epoxy layer model consisting of 20 epoxy monomers and a hydrophilic silica surface. Read More

View Article and Full-Text PDF

Bis[2-(Methacryloyloxy) Ethyl] Phosphate as a Primer for Enamel and Dentine.

J Dent Res 2021 Jul 8:220345211023477. Epub 2021 Jul 8.

Centre for Oral, Clinical and Translational Sciences, Faculty of Dentistry, Oral and Craniofacial Sciences, King's College London, London, UK.

Dental resin composites are commonly used in the restorative management of teeth via adhesive bonding, which has evolved significantly over the past few decades. Although current self-etch bonding systems decrease the number of clinical steps, the acidic functional monomers employed exhibit a limited extent of demineralization of enamel in comparison to phosphoric acid etchants, and the resultant superficial ionic interactions are prone to hydrolysis. This study evaluates the etching of primers constituted with bis[2-(methacryloyloxy) ethyl] phosphate (BMEP) of dental hard tissue, interfacial characteristics, and inhibition of endogenous enzymes. Read More

View Article and Full-Text PDF

[Preparation and application of chiral silica gel spheres based on L-glutamic].

Se Pu 2021 Jun;39(6):607-613

School of Chemistry and Chemical Engineering, Yunnan Normal University, Kunming 650500, China.

Inorganic mesoporous silica gel spheres, which possess sufficient mechanical strength, thermal stability, and mobile phase endurance, are the most important and widely used materials for column packing in high performance liquid chromatography (HPLC). However, amorphous silica gel is generally reported as an inorganic chiral silica gel, and spherical all-inorganic chiral silica gel has not been reportedly used as the chiral stationary phase for HPLC. In this paper, inorganic spherical mesoporous silica gel was used in the method of polymerization-induced colloid aggregation (PICA), with silica sol as the raw material and L-glutamic acid (L-Glu) as the chiral monomer, to obtain mixed spheres of urea-formaldehyde resin and colloidal silica in a chiral environment. Read More

View Article and Full-Text PDF

Effects of Surface Treatment Procedures on Bond Strength of Lithium Disilicate Glass Ceramic.

Chin J Dent Res 2021 Jun;24(2):119-124

Objective: To evaluate the microshear bond strength (μSBS) of resin cement to a lithium disilicate glass ceramic conditioned with different surface treatment procedures.

Methods: Crystallised slices of lithium disilicate glass ceramic were randomly divided into five groups (n = 10) according to different surface treatment procedures: the no surface treatment (NT) group was untreated; the hydrofluoric acid (HF) group was conditioned with 4.5% HF; the silane (S) group was conditioned with a silane coupling agent; the hydrofluoric acid and silane (HFS) group was conditioned with HF followed by the silane coupling agent; and the Monobond Etch & Prime (MEP) (Ivoclar Vivadent, Schaan, Liechtenstein) group was conditioned with the one-step self-etching primer MEP. Read More

View Article and Full-Text PDF

An evaluation of tensile bond strength of soft liners bonded to different denture base resins.

Ann Afr Med 2021 Apr-Jun;20(2):116-120

Professor, Department of Pediatric and Preventive Dentistry, Sharavathi Dental College and Hospital, Shimvaogga, Karnataka, India.

Background: Clinically, adhesion failure is the most critical problem because of the failure of the optimal bond between denture base and the soft liner.

Objectives: This study was performed to assess the tensile bond strength of two temporary soft liners to different denture base resins.

Materials And Methods: Forty-eight blocks with 16 samples each of heat-cured denture base resin of three different types were fabricated from custom-made stainless steel die after de-waxing mold space. Read More

View Article and Full-Text PDF

The Effect of Thermocycling on Interfacial Bonding Stability of Self-Etch Adhesives: OCT Study.

Biomed Res Int 2021 8;2021:5578539. Epub 2021 Jun 8.

Department of Restorative Dentistry, Faculty of Dentistry, King Abdulaziz University, P.O. Box 80209, Jeddah 215-89, Saudi Arabia.

Objective: The aim of this study was to monitor the behavior of interfacial gaps formed under different bonded polymeric restorations before and after thermocycling (TC), using swept-source optical coherence tomography (SS-OCT) and confirming the obtained findings with confocal laser scanning microscopy (CLSM).

Materials And Methods: Cylindrical class I cavities were prepared in twenty noncarious human premolar teeth (1.5 mm depth × 3. Read More

View Article and Full-Text PDF

Comparison of Tensile Bond Strength of Addition Silicone with Different Custom Tray Materials Using Different Retentive Methods.

J Contemp Dent Pract 2021 Mar 1;22(3):278-283. Epub 2021 Mar 1.

Department of Pedodontics and Preventive Dentistry, Bharati Vidyapeeth Dental College and Hospital, Pune, Maharashtra, India.

Aim: To compare the bond strength of addition silicone with different commonly used custom tray materials by means of different retentive methods (mechanical, chemical, and a combination of chemical and mechanical methods).

Materials And Methods: Fabrications of 90 samples of different tray resin materials were done using an aluminum mold. They were divided into three main groups. Read More

View Article and Full-Text PDF

Does Cavity Disinfectant Affect Sealing Ability of Universal Self-etch Adhesive?

J Contemp Dent Pract 2021 Mar 1;22(3):273-277. Epub 2021 Mar 1.

Department of Pedodontics and Preventive Dentistry, Hi-Tech Dental College and Hospital, Utkal University, Bhubaneswar, Odisha, India.

Aim: The purpose of this study was to evaluate 2% chlorhexidine disinfectant (CHX), chitosan, and octenidine dihydrochloride (as cavity disinfectants) on microleakage in cavities restored with universal self-etch adhesive.

Materials And Methods: Eighty extracted human permanent premolars were selected. Class V cavities were prepared on the facial surface of each tooth. Read More

View Article and Full-Text PDF

Effect of Different Resin Cements on the Bond Strength of Custom-made Reinforced Glass Fiber Posts-A Push-out Study.

J Contemp Dent Pract 2021 Mar 1;22(3):219-223. Epub 2021 Mar 1.

Department of Dentistry, Pontifical Catholic University of Minas Gerais, Belo Horizonte, Minas Gerais, Brazil, Phone: +55 (31) 33194414, e-mail:

Aim And Objective: This study aims to evaluate the effect of different resin cements on the bond strength (BS) of custom-made glass fiber posts (GFPs) using the push-out test.

Materials And Methods: Twenty-four uniradicular bovine teeth were selected. The crowns were sectioned at the cementoenamel junction, and the root canals were treated. Read More

View Article and Full-Text PDF

Push-Out Bond Strength Evaluation of Fiber-Reinforced Composite Resin Post Cemented with Self-Adhesive Resin Cement Using Different Adhesive Bonding Systems.

Materials (Basel) 2021 Jun 29;14(13). Epub 2021 Jun 29.

Oral Science Research Center, Department of Conservative Dentistry, College of Dentistry, Yonsei University, Seoul 03722, Korea.

The purpose of this in vitro study was to evaluate the push-out bond strength of fiber-reinforced resin posts using self-adhesive cements with different adhesive systems. A total of 50 single-rooted human maxillary premolars with fully developed apices and 15-16 mm straight root canals were selected. The teeth were divided into 10 groups with coronal and apical parts according to the adhesive bonding system and luting material used: one universal adhesive with MDP-containing self-adhesive resin cement; another universal adhesive with MDP-containing self-adhesive resin cement; universal primer with MDP-containing self-adhesive resin cement; universal primer with dual-cure resin cement; MDP-containing self-adhesive resin cement only (Control). Read More

View Article and Full-Text PDF

Cranberry Juice Extract Rapidly Protects Demineralized Dentin against Digestion and Inhibits Its Gelatinolytic Activity.

Materials (Basel) 2021 Jun 29;14(13). Epub 2021 Jun 29.

Department of Oral & Craniofacial Sciences and Center of Excellence in Mineralized Tissues, School of Dentistry, University of Missouri-Kansas City, 650 E 25th St., Kansas City, MO 64108, USA.

Improving the longevity of composite restorations has proven to be difficult when they are bonded to dentin. Dentin demineralization leaves collagen fibrils susceptible to enzymatic digestion, which causes breakdown of the resin-dentin interface. Therefore, measures for counteracting the enzymatic environment by enhancing dentin collagen's resistance to degradation have the potential to improve the durability of dental composite restorations. Read More

View Article and Full-Text PDF

The Bond Strength and Antibacterial Activity of the Universal Dentin Bonding System: A Systematic Review and Meta-Analysis.

Microorganisms 2021 Jun 6;9(6). Epub 2021 Jun 6.

Department of General Dentistry, Medical University of Lodz, 251 Pomorska St., 92-213 Lodz, Poland.

() is a group of viridans mostly located in oral flora among the wide and biodiverse biofilm. It plays a significant role not only in caries formation but also triggering intracerebral haemorrhage. The durable and stable bond interface, besides bacteria elimination, is one of the crucial factors influencing the resin composite restoration performance. Read More

View Article and Full-Text PDF