488 results match your criteria molar rubber


Reinforcement of Styrene Butadiene Rubber Employing Poly(isobornyl methacrylate) (PIBOMA) as High Thermoplastic Polymer.

Polymers (Basel) 2021 May 17;13(10). Epub 2021 May 17.

Luxembourg Institute of Science and Technology (LIST), 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg.

A set of poly(isobornyl methacrylate)s (PIBOMA) having molar mass in the range of 26,000-283,000 g mol was prepared either via RAFT process or using free radical polymerization. These linear polymers demonstrated high glass transition temperatures ( up to 201 °C) and thermal stability ( up to 230 °C). They were further applied as reinforcing agents in the preparation of the vulcanized rubber compositions based on poly(styrene butadiene rubber) (SBR). Read More

View Article and Full-Text PDF

Resin Bonding of a Lithium-Disilicate Crown Using a Ligated Rubber Dam: A 2-Year Case Report.

Compend Contin Educ Dent 2021 Apr;42(4):188-191

Professor, Department of Restorative Sciences, Dental College of Georgia, Augusta University, Augusta, Georgia.

Enduring glass-ceramic restorations greatly depend on the quality of adhesion of the crown to enamel and dentin. Proper isolation is vital to the success of bonded ceramic restorations. The rubber dam has long been considered the primary method of preventing contamination of the operating field, a crucial requisite for adhesion. Read More

View Article and Full-Text PDF

Presence of voids after three obturation techniques in band-shaped isthmuses: a micro-computed tomography study.

BMC Oral Health 2021 05 1;21(1):227. Epub 2021 May 1.

Department of Endodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine, College of Stomatology, Shanghai Jiao Tong University, Shanghai, 200011, China.

Background: The objective of the present micro-computed tomography (micro-CT) study was to assess the presence of voids in band-shaped isthmuses obturated using three different filling techniques.

Methods: Twenty-four artificial molar teeth with a band-shaped isthmus were allocated to three groups (n = 8) for obturation, according to the filling technique: single-cone (SC), continuous wave of condensation (CWC) or lateral condensation (LC). Obturation was performed with gutta-percha (GP) cones and iRoot SP (Innovative Bioceramix, Vancouver, Canada). Read More

View Article and Full-Text PDF

Simultaneous determination of molar degree of substitution and its distribution fraction, degree of acetylation in hydroxypropyl chitosan by H NMR spectroscopy.

Carbohydr Polym 2021 Jul 24;263:117950. Epub 2021 Mar 24.

State Key Laboratory Base of Eco-chemical Engineering, College of Chemical Engineering, Qingdao University of Science and Technology, No.53 Zhengzhou Road, Qingdao, 266042, China. Electronic address:

Under the assistance of C NMR and H-C HSQC, we develop a novel H NMR assay for the substitution sites and degrees in hydroxypropyl chitosan (HPCS) by optimizing sample preparation and measurement method. We find that the chemical shift of HOD peak increases linearly with the increase of DCl concentration but declines with the rise of measurement temperature. According to the regression line, the HOD peak could be moved to a desired position of non-interference with other peaks by changing DCl concentration. Read More

View Article and Full-Text PDF

Do composite restorations in primary molar teeth have a higher survival rate following total or selective caries removal?

Evid Based Dent 2021 01;22(1):38-39

Newcastle upon Tyne Hospital NHS Foundation Trust, Newcastle upon Tyne, UK; Senior Lecturer/Honorary Consultant in Paediatric Dentistry, School of Dental Sciences, Faculty of Medical Sciences, Newcastle University, Newcastle upon Tyne, UK.

Study design A double-blind randomised clinical trial, conducted between June 2009 and June 2011, in a paediatric dental department in a Brazilian dental school.Study selection Children aged 3-8 years, in good general health, with deep carious lesions (caries radiographically located in the inner quarter of dentine) affecting either one or two surfaces in primary molars were eligible for inclusion. Teeth were excluded if clinical or radiographic evidence of pulpal inflammation or necrosis or clinical mobility were observed. Read More

View Article and Full-Text PDF
January 2021

Effect of obturation technique using a new bioceramic sealer on the presence of voids in flattened root canals.

Braz Oral Res 2021 12;35:e028. Epub 2021 Feb 12.

Universidade Estadual Paulista - Unesp, School of Dentistry , Department of Restorative Dentistry , Araraquara , SP , Brazil .

The aim of this study was to evaluate the filling ability of a new ready-to-use calcium silicate-based sealer using thermoplastic or single-cone technique in flattened root canals. Twenty-four flattened distal canals of mandibular molars with a buccolingual diameter 4 or more times larger than the mesiodistal diameter were selected. The root canals were prepared and filled (n = 12), according to the following techniques: thermoplastic or single-cone technique using Bio-C Sealer. Read More

View Article and Full-Text PDF
February 2021

Amphiphilic Poly(dimethylsiloxane-ethylene-propylene oxide)-polyisocyanurate Cross-Linked Block Copolymers in a Membrane Gas Separation.

Membranes (Basel) 2021 Jan 29;11(2). Epub 2021 Jan 29.

Laboratory of Membrane and Catalytic Processes, Nizhny Novgorod State Technical University n.a. R.E. Alekseev, 24 Minin str., 603950 Nizhny Novgorod, Russia.

Amphiphilic poly(dimethylsiloxane-ethylene-propylene oxide)-polyisocyanurate cross-linked block copolymers based on triblock copolymers of propylene and ethylene oxides with terminal potassium-alcoholate groups (PPEG), octamethylcyclotetrasiloxane (D) and 2,4-toluene diisocyanate (TDI) were synthesized and investigated. In the first stage of the polymerization process, a multiblock copolymer (MBC) was previously synthesized by polyaddition of D to PPEG. The usage of the amphiphilic branched silica derivatives associated with oligomeric medium (ASiP) leads to the structuring of block copolymers via the transetherification reaction of the terminal silanol groups of MBC with ASiP. Read More

View Article and Full-Text PDF
January 2021

Effects of Substituting Polyisoprenyl Carbanions for Ethoxyl Groups of Bis-[3-(triethoxysilyl)propyl] Tetrasulfide on the Properties of Carbon Black and Silica-Reinforced NR/SSBR.

ACS Omega 2021 Feb 15;6(4):2800-2812. Epub 2021 Jan 15.

Department of Chemical Engineering, National Chung Cheng University, Chia-Yi 62102, Taiwan.

The coupling agent TESPT (bis-[3-(triethoxysilyl)propyl] tetrasulfide) was modified by substituting polyisoprenyl (PI) carbanions for the ethoxyl groups on silicon for increasing the interaction of rubber with its fillers. The modification was carried out by the reaction of TESPT with polyisoprenyllithium, which had been previously prepared by anionic polymerization of isoprene using butyllithium. The success of the substitution was confirmed by Fourier-transform infrared spectroscopy, and the molecular weight of the modified TESPT (PI-TESPT) was determined from gel permeation chromatography measurements. Read More

View Article and Full-Text PDF
February 2021

Aerosols generation using Er,Cr:YSGG laser compared to rotary instruments in conservative dentistry: A preliminary study.

J Clin Exp Dent 2021 Jan 1;13(1):e30-e36. Epub 2021 Jan 1.

DDS, MSc. Faculty of Medicine and Health Sciences, University of Barcelona. Barcelona, Spain. Master of Laser in Dentistry (EMDOLA) University of Barcelona. Spain.

Background: In restorative dentistry, the use of high-speed air turbine, which generates aerosols, can be associated with the transmission of airborne diseases. New laser technologies could be useful in reducing the amount of aerosols, but there is a lack of scientific research on this topic.

Material And Methods: This is a descriptive study to analyze the amount of aerosols produced after class I cavity preparation using high-speed air turbine (group 1) and Er,Cr:YSGG laser with two different parameters (groups 2 and 3). Read More

View Article and Full-Text PDF
January 2021

Effective and reliable platform for nonenzymatic nanomolar-range quinol detection in water samples using ceria doped polypyrrole nanocomposite embedded on graphitic carbon nitride nanosheets.

Chemosphere 2021 May 2;271:129533. Epub 2021 Jan 2.

Department of Civil Engineering, Sethu Institute of Technology, Virudhunagar, 626 115, Tamil Nadu, India.

A glassy carbon electrode modification by a novel ternary nanocomposite of advantageously united ceria, polypyrrole, and graphitic carbon nitride (CeO/[email protected]) is reported here. It can be used to tailor the sensor surface for the electrochemical detection of nanomolar-level quinol (Qnl), a chemical widely used as a developing agent in photography and lithography, as a cosmetic, and as an antioxidant in rubber and food industries. The occupational exposure of Qnl may occur by inhalation or dermal contact, leading to lot of health hazards. Read More

View Article and Full-Text PDF

Preoperative Intraligamentary Injection of Dexamethasone Can Improve the Anesthetic Success Rate of 2% Lidocaine during the Endodontic Management of Mandibular Molars with Symptomatic Irreversible Pulpitis.

J Endod 2021 Feb 30;47(2):161-168. Epub 2020 Nov 30.

Division of Conservative Dentistry and Endodontics, Post Graduate Institute of Medical Sciences, Chandigarh, India.

Introduction: The aim of this randomized, double-blind clinical trial was to evaluate the effect of preoperative administration of intraligamentary injections of diclofenac sodium and dexamethasone on the anesthetic efficacy of 2% lidocaine given as an inferior alveolar nerve block in the endodontic management of symptomatic irreversible pulpitis.

Methods: One hundred seventeen patients randomly received 1 of the 3 intraligamentary injections before the endodontic treatment: 0.9% normal saline, 25 mg/mL diclofenac sodium, or 4 mg/mL dexamethasone. Read More

View Article and Full-Text PDF
February 2021

Association between concentration of active MMP-9 in pulpal blood and pulpotomy outcome in permanent mature teeth with irreversible pulpitis - a preliminary study.

Int Endod J 2021 Apr 13;54(4):479-489. Epub 2020 Dec 13.

Department of Biostatistics, All India Institute of Medical Sciences, New Delhi, India.

Aim: To investigate the correlation between the concentration of active-matrix metalloproteinases-9 (aMMP-9) in pulpal blood and the outcome of pulpotomy in mature permanent teeth with symptomatic irreversible pulpitis (SIP).

Methodology: Forty permanent molar teeth with a clinical diagnosis of SIP and normal apical tissues with periapical index (PAI) score ≤ 2 and ten permanent teeth (8 molars and two premolars) with a diagnosis of normal pulp that required root canal treatment for prosthetic reasons from patients between the ages of 15-35 years were recruited. All clinical procedures were performed under local anaesthesia and rubber dam isolation. Read More

View Article and Full-Text PDF

Comparison of the efficacy of different Ni-Ti instruments in the removal of gutta-percha and sealer in root canal retreatment.

Indian J Dent Res 2020 Jul-Aug;31(4):579-584

Department of Endodontics, Center for Operative Dentistry and Periodontology, University of Dental Medicine and Oral Health, Danube Private University (DPU), Krems, Austria; Department of Operative Dentistry and Periodontology, Center for Dental Medicine, Oral and Maxillofacial Surgery, Medical Center, University of Freiburg, Freiburg i.Br., Germany.

Aims: To evaluate and compare the efficacy of four rotary instrumentation systems in root canal retreatment and to determine retreatment time.

Materials And Methods: To achieve the purpose of this study, canals of 60 distal roots in mandibular molar teeth were selected and randomly divided into four groups A, B, C and D (n = 15). Using step-back technique, the canals were prepared and filled with gutta-percha and AH Plus employing cold lateral compaction technique. Read More

View Article and Full-Text PDF
October 2020

Effect of drain application on postoperative complaints after surgical removal of impacted wisdom teeth-a randomized observer-blinded split-mouth clinical trial.

Clin Oral Investig 2021 Jan 21;25(1):345-353. Epub 2020 Jul 21.

Department of Oral and Maxillofacial Surgery, University Hospital RWTH Aachen, Pauwelstraße 30, 52074, Aachen, Germany.

Objectives: The aim of this randomized observer-blinded split-mouth-study is to objectively assess the influence of a rubber drain on postoperative swelling using 3D face scans as measurement method and additionally evaluate pain, trismus and complications after the osteotomy of lower third molars.

Material And Methods: Seventy-two patients with symmetrically impacted lower wisdom teeth were recruited. Before the operation, patients rated pain using the visual analogue scale, the interincisal distance was measured, and 3D face scans were taken with an optical scanner. Read More

View Article and Full-Text PDF
January 2021

Synergetic Effect of Water-Soluble PEG-Based Macromonomers and Cellulose Nanocrystals for the Stabilization of PMMA Latexes by Surfactant-Free Emulsion Polymerization.

Biomacromolecules 2020 11 6;21(11):4479-4491. Epub 2020 Jul 6.

Univ Lyon, Université Claude Bernard Lyon 1, CPE Lyon, CNRS, UMR 5265, Chemistry, Catalysis, Polymers and Processes (C2P2), 43 Bd du 11 Novembre 1918, 69616 Villeurbanne, France.

The combination of cellulose nanocrystals (CNCs) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) was evaluated to synthesize stable latexes by surfactant-free emulsion polymerization of methyl methacrylate (MMA). Cellulose-particle interaction was provided due to the dual role of PEGMA, acting as water-soluble comonomer with MMA under emulsion polymerization conditions and able to interact with CNCs, recovered from sulfuric acid hydrolysis (HSO-CNCs). After preliminary experiments designed to validate the affinity between CNCs and PEG-stabilized PMMA particles obtained by MMA/PEGMA emulsion copolymerization, the effect of the PEGMA content and molar mass and also of the content of CNCs on the kinetics of the polymerization and the stability of the latexes were investigated. Read More

View Article and Full-Text PDF
November 2020

Optimization and kinetic studies on conversion of rubber seed (Hevea brasiliensis) oil to methyl esters over a green biowaste catalyst.

J Environ Manage 2020 Aug 14;268:110705. Epub 2020 May 14.

Biochemical Engineering Laboratory, Department of Chemical Engineering, Obafemi Awolowo University, Ile-Ife, 220005, Osun State, Nigeria; Department of Biological Sciences, Florida Agricultural and Mechanical Engineering University, Tallahassee, FL, 32307, USA. Electronic address:

The goal of the study was to establish the optimal condition for the transesterification process for Hevea brasiliensis oil (HBO) conversion into H. brasiliensis oil methyl esters (HBOME) using a novel base heterogeneous catalyst synthesized from a biowaste (kola nut pod husk). Thus, the influence of concentration of catalyst, MeOH:HBO molar ratio, reaction time and reaction temperature on the HBOME yield was identified using Taguchi orthogonal array design approach. Read More

View Article and Full-Text PDF

One-year Clinical Evaluation of Retention Ability and Anticaries Effect of a Glass Ionomer-based and a Resin-based Fissure Sealant on Permanent First Molars: An Study.

Int J Clin Pediatr Dent 2019 Nov-Dec;12(6):553-559

Department of Pedodontics and Preventive Dentistry, Government Dental College, Kozhikode, Kerala, India.

Aim: To evaluate and compare the retention ability, anticaries effect and marginal discoloration when sealed with a glass ionomer-based sealant (Fusion i-seal) and a resin-based fissure sealant (Helioseal-F) on permanent first molars.

Materials And Methods: Caries free, fully erupted permanent first molars of 50 children between 6 years and 8 years were sealed with pit and fissure sealants under rubber dam isolation. Glass ionomer-based sealant was applied on a permanent first molar and the contralateral molar with resin-based sealant. Read More

View Article and Full-Text PDF

The efficacy of different cleaning protocols for the sealer-contaminated access cavity.

Clin Oral Investig 2020 Nov 21;24(11):4101-4107. Epub 2020 Apr 21.

Department of Oral Health Sciences, Section of Endodontology, Ghent University, C. Heymanslaan 10/P8, B, 9000, Ghent, Belgium.

Objectives: Sealer remnants in the access cavity may negatively affect coronal seal and cause tooth discoloration. This study sought to evaluate the efficacy of different cleaning protocols for the sealer-contaminated access cavity.

Materials And Methods: Sixty extracted human molars were accessed, chemomechanically prepared and warm vertically obturated with gutta-percha and epoxy resin sealer. Read More

View Article and Full-Text PDF
November 2020

Primary closure after surgical extraction of mandibular third molar with or without tube drain: A prospective study.

J Family Med Prim Care 2020 Feb 28;9(2):637-641. Epub 2020 Feb 28.

Department of Prosthodontics and Crown and Bridge, Rungta College of Dental Sciences and Research, Bhilai, Chhattisgarh, India.

Introduction: The surgical removal of impacted third molars is considered one of the most frequent procedures in oral and maxillofacial surgery. The utilization of drain is suggested for the reduction of postoperative complications, because it permits the drainage of the fluids located in the tissue spaces.

Material And Methods: A prospective randomized clinical study was conducted with 30 patients each in two groups undergoing surgical extraction of mandibular third molars with and without drain. Read More

View Article and Full-Text PDF
February 2020

[A novel tray for recording maxillomandibular relationship of edentulous patients based on dimensional surveying of complete dentures].

Beijing Da Xue Xue Bao Yi Xue Ban 2020 Apr;52(2):368-372

Department of Prosthodontics, Center for Digital Dentistry, Peking University School and Hospital of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology, Beijing 100081, China.

Objective: To measure the dimensional data of complete dentures and to design a novel tray for recording maxillomandibular relationship of edentulous patients.

Methods: For the measurement, 100 pairs of complete dentures from the clinic were surveyed for the following parameters: a1, the distance between the middle fossa of the upper left and right first molars; a2, the anterior-posterior distance between the middle fossa of the upper first molars and the incisal edge; a3, the width of the upper denture; a4, the anterior-posterior length of the upper denture; a5, the height from the mesio-lingual cusp of the right upper first molar to the saddle surface; a5, the height from the central fossa of the right lower first molar to the saddle surface; a6, the height from the notch of the upper lip frenulum to the upper central incisor edge; a7, the least thickness of the labial saddle base in the upper central incisor region. Based on the data, the trays with different sizes were designed and fabricated, and the key parameters were: b1, the distance between the foramina of screw posts, b2, the anterior-posterior distance between the foramina of the screw posts and the incisal edge; b3, the width of the tray; b4, the anterior-posterior length of the tray; b5, the height of the posterior platform with the screw nut; b5, the height of the screw post; b6, the height of the anterior tray handle; b7, the thickness of the anterior tray handle. Read More

View Article and Full-Text PDF

Success rate of proximal tooth-coloured direct restorations in primary teeth at 24 months: a meta-analysis.

Sci Rep 2020 04 14;10(1):6409. Epub 2020 Apr 14.

Department of Basic Psychology & Methodology, Faculty of Psychology, University of Murcia, Murcia, Spain.

The aim was to determine the survival of tooth-coloured restorative materials in proximal restorations of primary teeth at 24 months of follow-up and the influence of the following variables: use of coating, use of cavity conditioner, use of rubber dam isolation, the cavity form, the dentist's experience and the methodological characteristics of the studies. We conducted a search until May 2019, obtaining 16 articles from which 30 independent studies were extracted, which were considered as units of analysis. Four outcome measures were extracted from each study: retention, marginal integrity, anatomic form, and absence of recurrent caries. Read More

View Article and Full-Text PDF

In-situ preparation of hollow cellulose nanocrystals/zeolitic imidazolate framework hybrid microspheres derived from Pickering emulsion.

J Colloid Interface Sci 2020 Jul 23;572:160-169. Epub 2020 Mar 23.

Key Laboratory of Rubber-Plastics, Ministry of Education/Shandong Provincial Key Laboratory of Rubber-Plastics, Qingdao University of Science & Technology, Qingdao City 266042, PR China.

In situ interfacial growth of nanoparticles induced by a Pickering emulsion is recognized as a practical method for the fabrication of hollow composites. Herein, hybrid hollow microspheres were prepared using cellulose nanocrystals (CNCs) emulsified water-dodecane system as a template. The hybrid microspheres were composed of zeolitic imidazolate framework-8 (ZIF-8) shells and CNCs surface-layers. Read More

View Article and Full-Text PDF

The effect of occlusal loading on cervical gap deformation: A 3D finite element analysis.

Dent Mater 2020 05 29;36(5):681-686. Epub 2020 Mar 29.

Department of Bioscience Research, College of Dentistry, University of Tennessee Health Science Center, 875 Union Avenue, 38163 Memphis, TN, USA. Electronic address:

Objectives: Secondary caries can be accelerated by hydrodynamic flow in a gap between the tooth and restorative material. This study investigated whether occlusal loading can lead to increased hydrodynamic flow by deforming a gap between tooth and restorative material.

Methods: 3D finite element analysis was employed to model a molar containing a restoration with an interfacial gap. Read More

View Article and Full-Text PDF

An Innovative Treatment Approach Using Digital Workflow and CAD-CAM Part 2: The Restoration of Molar Incisor Hypomineralization in Children.

Int J Environ Res Public Health 2020 02 26;17(5). Epub 2020 Feb 26.

Department of Otolaryngology Head and Neck Surgery and Maxillofacial Surgery Tel-Aviv Sourasky Medical Center, Sackler School of Medicine, Tel Aviv University, Tel-Aviv 6139001, Israel.

Until recently, the treatment for molar incisor hypomineralization (MIH) mainly included interim restorations such as resin restorations and stainless-steel crowns. These require replacement after adolescence. The use of intraoral scanners (IOS) has opened a new venue for restoring MIH teeth, by reducing the challenge of dealing with uncooperative children's behavior and enabling tooth structure preservation and long-lasting restoration. Read More

View Article and Full-Text PDF
February 2020

An Innovative Treatment Approach Using Digital Workflow and CAD-CAM Part 1: The Restoration of Endodontically Treated Molars in Children.

Int J Environ Res Public Health 2020 02 20;17(4). Epub 2020 Feb 20.

Department of Otolaryngology Head and Neck Surgery and Maxillofacial Surgery Tel-Aviv Sourasky Medical Center, Sackler School of Medicine, Tel Aviv University, Tel-Aviv 6139001, Israel.

Stainless steel crowns are the most popular restoration technique for young permanent first molars treated endodontically. However, these restorations are not aesthetically appealing and need to be replaced. Endocrowns constitute a reliable approach for restoring severely damaged molars and premolars. Read More

View Article and Full-Text PDF
February 2020

Endodontic considerations of survival rate for autotransplanted third molars: a nationwide population-based study.

Int Endod J 2020 Jun 27;53(6):733-741. Epub 2020 Feb 27.

Department of Dentistry, School of Dentistry, National Yang-Ming University, Taipei, Taiwan.

Aim: To investigate whether the timing of root canal treatment (primary aim) or other endodontic parameters (secondary aim) is associated with the survival probability of autotransplanted third molars, using a nationwide population-based database.

Methodology: A total of 1811 third molars autotransplanted between 2000 and 2013 met the inclusion criteria and were followed until the end of 2016. The teeth were classified into three groups on the basis of timing between root canal treatment and the autotransplantation: preoperative, extraoral and postoperative treatment groups. Read More

View Article and Full-Text PDF

Occlusal load modelling significantly impacts the predicted tooth stress response during biting: a simulation study.

Comput Methods Biomech Biomed Engin 2020 May 22;23(7):261-270. Epub 2020 Jan 22.

Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Stuttgart, Germany.

Computational models of the masticatory system can provide estimates of occlusal loading during (static) biting or (dynamic) chewing and therefore can be used to evaluate and optimize functional performance of prosthodontic devices and guide dental surgery planning. The modelling assumptions, however, need to be chosen carefully in order to obtain meaningful predictions. The objectives of this study were two-fold: (i) develop a computational model to calculate the stress response of the first molar during biting of a rubber sample and (ii) evaluate the influence of different occlusal load models on the stress response of dental structures. Read More

View Article and Full-Text PDF

Various wound closure ways after impacted lower wisdom teeth removal: A review.

Stomatologija 2020 ;22(4):107-115

Department of Maxillofacial, Faculty of Dentistry, Lithuanian University of Health Sciences, Eivenių g. 2, LT-50161 Kaunas Lithuania.

Objective: Evaluate the influence of different wound closure methods in terms of pain, swelling, trismus, infection and healing time after third molar extraction.

Material And Methods: A literature analysis was performed according to PRISMA guidelines in search of clinical trials published between 2015 and 2020. Databases were searched using different combinations of the following keywords: mandibular impacted OR retained wisdom teeth OR third molar removal OR extraction AND surgical removal AND discomfort OR pain OR trismus OR swelling AND drain OR drainage. Read More

View Article and Full-Text PDF

Presence of voids after warm vertical compaction and single-cone obturation in band-shaped isthmuses using micro-computed tomography: A phantom study.

Microsc Res Tech 2020 Apr 12;83(4):370-374. Epub 2019 Dec 12.

Department of Endodontics, Faculty of Dentistry, Ondokuz Mayis University, Samsun, Turkey.

The present micro-computed tomography (micro-CT) study compared the presence of voids in the band-shaped isthmuses obturated by warm vertical compaction (WVC) and single-cone (SC) techniques. Twenty mesial roots from mandibular first molar teeth showing a band-shaped isthmus were selected and assigned into two groups based on their preoperative anatomical dimensions (n = 10), according to the filling technique: WVC or SC. Post-filling micro-CT scanning was performed. Read More

View Article and Full-Text PDF

Chlorination and bromination of 1,3-diphenylguanidine and 1,3-di-o-tolylguanidine: Kinetics, transformation products and toxicity assessment.

J Hazard Mater 2020 03 13;385:121590. Epub 2019 Nov 13.

Department of Analytical Chemistry, Nutrition and Food Sciences, Institute of Food Analysis and Research (IIAA), Universidade de Santiago de Compostela, R/ Constantino Candeira S/N, 15782 Santiago de Compostela, Spain. Electronic address:

This works investigates the chlorination and bromination of two rubber and polymer related chemicals, which have emerged as relevant water contaminants, i.e. 1,3-di-o-tolylguanidine (DTG) and 1,3-diphenylguanidine (DPG). Read More

View Article and Full-Text PDF