Fluoride release from two types of fluoride-containing orthodontic adhesives: Conventional versus resin-modified glass ionomer cements-An in vitro study.

Authors:

Yasemin Dziuk Sachin Chhatwani Stephan C Möhlhenrich Sabrina Tulka Ella A Naumova Gholamreza Danesh

PLoS One 2021 26;16(2):e0247716. Epub 2021 Feb 26.

Department of Orthodontics, Faculty of Health, University of Witten/Herdecke, Witten, Germany.

Introduction: Development of white spot lesions (WSLs) during orthodontic treatment is a common risk factor. Fixation of the orthodontic appliances with glass ionomer cements could reduce the prevalence of WSL's due to their fluoride release capacities. The purpose of this study was to evaluate differences of fluoride release properties from resin-modified and conventional glass ionomer cements (GICs).

Methods: The resin-modified GICs Fuji ORTHO LC (GC Orthodontics), Meron Plus QM (VOCO), as well as the conventional GICs Fuji ORTHO (GC Orthodontics), Meron (VOCO) and Ketac Cem Easymix (3M ESPE) were tested in this study. The different types of GICs were applied to hydroxyapatite discs according to the manufacturer's instructions and stored in a solution of TISAB III (Total Ionic Strength Adjustment Buffer III) and fluoride-free water at 37°C. Fluoride measurements were made after 5 minutes, 2 hours, 24 hours, 14 days, 28 days, 2 months, 3 months and 6 months. One factor analysis of variance (ANOVA) was used for the overall comparison of the cumulative fluoride release (from measurement times of 5 minutes to 6 months) between the different materials with the overall level of significance set to 0.05. Tukey's post hoc test was used for post hoc pairwise comparisons in the cumulative fluoride release between the different materials.

Results: The cumulative fluoride release (mean ± sd) in descending order was: Fuji ORTHO LC (221.7 ± 10.29 ppm), Fuji ORTHO (191.5 ± 15.03 ppm), Meron Plus QM (173.0 ± 5.89 ppm), Meron (161.3 ± 7.84 ppm) and Ketac Cem Easymix (154.6 ± 6.09 ppm) within 6 months. Analysis of variance detected a significant difference in the cumulative fluoride release between at least two of the materials (rounded p-value < 0.001). Pairwise analysis with Tukey's post hoc test showed a significant difference in the cumulative fluoride release for all the comparisons except M and MPQM (p = 0.061) and KCE and M (p = 0.517).

Conclusion: Fluoride ions were released cumulatively over the entire test period for all products. When comparing the two products from the same company (Fuji ORTHO LC vs. Fuji ORTHO from GC Orthodontics Europe GmbH and Meron Plus QM vs. Meron from VOCO GmbH, Mannheim, Germany), it can be said that the resin-modified GICs have a higher release than conventional GICs. The highest individual fluoride release of all GICs was at 24 hours. A general statement, whether resin-modified or conventional GICs have a higher release of fluoride cannot be made.

Download full-text PDF	Source
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0247716	PLOS
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7909673	PMC

February 2021

Publication Analysis

Top Keywords

resin-modified conventional

hoc test

Keyword Occurance

Similar Publications

Sesame Oil () as a New Challenge for Reinforcement of Conventional Glass Ionomer Cement, Could It Be?

Authors:

Neven S Aref

Int J Dent 2021 22;2021:5516517. Epub 2021 Mar 22.

Department of Dental Biomaterials, Faculty of Dentistry, Mansoura University, Mansoura, Egypt.

Purpose: Despite the advantages of glass ionomer cement (GIC) including chemical bonding to the tooth structure and fluoride release, its low-grade mechanical properties make it a topic for research. Accordingly, this study was conducted to assess the ability of sesame oil as a natural bioactive additive to reinforce conventional glass ionomer cement.

Materials And Methods: Sesame oil was blended into the liquid component of the cement in ratios of 3 and 5 (v/v%). Read More

View Article and Full-Text PDF

March 2021

Similar Publications

Reaction Mechanisms during Atomic Layer Deposition of AlF Using Al(CH) and SF Plasma.

Authors:

Martijn F J Vos Harm C M Knoops Wilhelmus M M Kessels Adriaan J M Mackus

J Phys Chem C Nanomater Interfaces 2021 Feb 10;125(7):3913-3923. Epub 2021 Feb 10.

Department of Applied Physics, Eindhoven University of Technology, P.O. Box 513, 5600 MB Eindhoven, The Netherlands.

Metal fluorides generally demonstrate a wide band gap and a low refractive index, and they are commonly employed in optics and optoelectronics. Recently, an SF plasma was introduced as a novel co-reactant for the atomic layer deposition (ALD) of metal fluorides. In this work, the reaction mechanisms underlying the ALD of fluorides using a fluorine-containing plasma are investigated, considering aluminum fluoride (AlF) ALD from Al(CH) and an SF plasma as a model system. Read More

View Article and Full-Text PDF

February 2021

Similar Publications

Release and Recharge of Fluoride Ions from Acrylic Resin Modified with Bioactive Glass.

Authors:

Zbigniew Raszewski Danuta Nowakowska Wlodzimierz Wieckiewicz Agnieszka Nowakowska-Toporowska

Polymers (Basel) 2021 Mar 27;13(7). Epub 2021 Mar 27.

Department of Prosthodontics, Wroclaw Medical University, 50-425 Wroclaw, Poland.

Background: Oral hygiene is essential for maintaining residual dentition of partial denture wearers. The dental material should positively affect the oral environment. Fluoride-releasing dental materials help to inhibit microbial colonization and formation of plaque as well as to initiate the remineralization process in the early cavity area. Read More

View Article and Full-Text PDF

March 2021

Similar Publications

Removal of Fluoride from Water Using a Calcium-Modified Dairy Manure-Derived Biochar.

Authors:

Anna Rose Wallace Chunming Su Yong-Keun Choi Eunsung Kan Wenjie Sun

J Environ Eng (New York) 2020 Dec;146(12):1-10

Dept. of Civil and Environmental Engineering, Southern Methodist Univ., Dallas, TX 75275.

This study investigated the removal of fluoride from water using a calcium-modified dairy manure-derived biochar (Ca-DM500). The Ca-DM500 showed a 3.82 - 8. Read More

View Article and Full-Text PDF

December 2020

Similar Publications

Do viscosity and wettability of fluoride varnishes affect their fluoride release?

Authors:

Jackeline Asian Edgar Quenta Jorge L Castillo

J Clin Exp Dent 2021 Mar 1;13(3):e221-e226. Epub 2021 Mar 1.

Professor, Universidad Peruana Cayetano Heredia, School of Stomatology, Department of Dentistry for Children and Adolescents,Lima, Peru.

Background: There are several brands of fluoride varnishes in the market, but the dynamics of fluoride release from each one might be different. The purpose of this study was to evaluate in vitro the release of fluorides by fluoride varnishes and to determine the correlation with viscosity and wettability.

Material And Methods: Forty four enamel blocks 5x5 mm were randomly divided into 4 groups (n=11) ((Duraphat®, Clinpro™ White Varnish, Flúor Protector® and control). Read More

View Article and Full-Text PDF

March 2021

Similar Publications

Search Our Scientific Publications & Authors